Home > Fiber Optic Tools And Equipment >

High Quality Optical Fiber Aligner Communication Connecting Tool

Product Categories

Fiber Optic Fast Connector [62]
Fiber Optic Splitter [51]
Outdoor Fiber Optic Cable [25]
Indoor Fiber Optic Cable [21]
FTTH Terminal Box [55]
Fiber Optic Connector [55]
Fiber Optic Adapter [136]
Fiber Optic Attenuator [15]
Pigtail Patch Cord [47]
Fiber Optic Splice Closure [78]
ODF Fiber Optic Patch Panel [19]
Cable Reel Cart [21]
SFP Optical Transceiver [9]
Fiber Optic Tools And Equipment [253]

Shenzhen Fongko Communication Equipment Co.,Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

High Quality Optical Fiber Aligner Communication Connecting Tool

Ask Lasest Price
Brand Name :	Fongko
Model Number :	FKEQU-024
Price :	Negotiatable
Payment Terms :	L/C, T/T, Western Union, MoneyGram

Add to Cart

Product Details
Company Profile

High Quality Optical Fiber Aligner Communication Connecting Tool

Features

a) Adopt high-quality guide rail, precision-class ceramic V-groove and head, low splice loss, and good consistency.
b) small size, light weight, easy to operate.

Product characteristics

Applicable fiber: 250μm and 900μm fibers; clad-fiber diameter: 125μm;
Splice loss: For 160A, splice loss is not more than 0.05dB; for 160F, splice loss not more than 0.03dB

Operation procedure

1. Turn on the light source and the test instrument 30 minutes in advance, then connect the two devices with bare fiber, and reset the test instrument to zero.
2. Remove the bare fiber used for reset, turn the knob clockwise to adjust the movable end of the aligner to the farthest
position.
3. Connect the FC head of the tested pigtail to the tester, and clamp the other end with a single-core fixture. Adopt stripping pliers , clean the bare fiber and the standard cutter in turn. After cutting, place it on the fixed end (left end) of the
single-core fiber aligner, and insert the bare fiber accurately into the V groove.
4. Clamp the single fiber of the device under test with a single-core fixture, adopt the stripper, clean the bare fiber and the
standard cutter, after cutting, place it on the movable end (right end) of the single-core fiber aligner, and insert the bare
fiber accurately into the V groove. Drop a little matching liquid in the middle of the V groove, and then close the upper
cover plate. Note: Steps 3) and 4) require to cut the optical fiber into a fixed length, otherwise the test data may be
unstable.
5. Turn the knob counterclockwise, allowing the movable end to move freely to automatically connect the optical fiber in the Vgroove, and then observe the test instrument to inspect each indicator of the tested device.

Applicable fiber	single-core fiber
fiber diameter	125μm
Splice loss	≤0.05dB
Operation temp	-10 ℃-40 ℃
Size	120(mm)75(mm)66(mm)
Weight	570g

High Quality Optical Fiber Aligner Communication Connecting Tool

Company Profile

PACKING&SHIPPING

Product Tags:


*From:	Your email address is incorrect!
*To:	Shenzhen Fongko Communication Equipment Co.,Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!